Air Spray Gun Extensions

Binks Conventional Gun Extensions are available for a variety of Binks spray guns. Standard lengths from 9" to 84", with custom lengths available on request. All extensions must be pressure fed from pressure tank, pump, or pressure cup. Extensions are made to fit Binks model 2001, 2100, 95, and the Trophy hand guns, as well as model 21, 95A, and Trophy automatic guns. Now available for DeVilbiss Compact Guns: Type "C", "SC", and "SCMBX" now available for DeVilbiss Compact "Silver" manual and automatic spray guns.
  • Binks Type C & HC Circular Spray Extensions

    Binks Type C & HC Circular Spray Extensions
    Binks Circular Type "C" and "HC" spray gun extensions.
    • Used to coat the inside diameter of 2" to 24" pipe.
    • 360 degree spray pattern
    • Forward angle, forward angle/forward spray, right angle or reverse angle tip (specify when ordering).
    • Fits through a 3/4" clearance hole.
    • Type "C" best suited for thin to medium viscosity materials.
    • Type "HC" best suited for medium to heavy viscosity materials.
    • Long needle shuts material off at the tip.
  • Binks Type SC Circular Spray Extensions

    Binks Type SC Circular Spray Extensions
    Binks Circular Type "SC" spray gun extensions.
    • Used to coat the inside diameter of 3/4" to 12" pipe.
    • 360 degree spray pattern at right angle to extension.
    • Fits through a 3/8" clearance hole.
    • Best suited for thin to medium viscosity materials.
    • Long needle shuts material off at the tip.
  • Binks Type SCMBX Circular Spray Extensions

    Binks Type SCMBX Circular Spray Extensions
    Binks Circular Type "SCMBX" spray gun extensions for fine atomization.
    • Used to coat the inside diameter of 3/4" to 12" pipe.
    • 360 degree spray pattern at right angle to extension.
    • Fits through a 3/8" clearance hole.
    • Best suited for thin to medium viscosity materials.
    • Long needle shuts material off at the tip.
  • Binks Type HCVT Circular Spray Extensions

    Binks Type HCVT Circular Spray Extensions
    Binks Circular Type "HCVT" spray gun extensions. Tungsten carbide nozzle assembly is suitable for abrasive materials.
    • Used to coat the inside diameter of 3" to 24" pipe.
    • 360 degree spray pattern
    • Forward angle or right angle tip (specify when ordering).
    • Fits through a 1-1/8" clearance hole.
    • Best suited for medium to heavy viscosity materials.
    • Long needle shuts material off at the tip.
  • Binks Flexible Circular Spray Extension

    Binks Flexible Circular Spray Extension
    Binks 52-2410 Flexible Circular spray gun extension. Typically used to spray the inside of curved pipes, long pipes, or other hard to reach areas. Extension nozzle is clamped to user-supplied hose. Fits any Binks spray gun with standard 60 series air nozzle thread.
    • Used with customer-supplied 5/16" ID fluid hose and clamps, hose length as required.
    • Fits through a 1" clearance hole.
    • Best suited for thin to medium viscosity materials.
    • Attaches in place of standard air nozzle.
  • Binks Type EA Forward Spray Extensions

    Binks Type EA Forward Spray Extensions
    Binks Forward Spray Type "EA" spray gun extension.
    • Used to extend the reach in a forward spray pattern.
    • Uses any of the 60 series air and fluid nozzles.
    • Adjustment knob for fan control.
    • Fits through a 1-3/4" clearance hole.
    • Extension head is fixed-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type EAX Forward Spray Extensions

    Binks Type EAX Forward Spray Extensions
    Binks Forward Spray Type "EAX" spray gun extension.
    • Used to extend the reach in a forward spray pattern.
    • Uses smaller J series air and fluid nozzles.
    • Fits through a 7/8" clearance hole.
    • Extension head is fixed-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type SA Forward Spray Extensions

    Binks Type SA Forward Spray Extensions
    Binks Forward Spray Type "SA" spray gun extension.
    • Used to extend the reach in a forward spray pattern.
    • Fits through a 7/16" clearance hole.
    • Best suited for thin to medium viscosity materials.
    • Long needle shuts material off at the tip.
  • Binks Type EN 45° Angled Spray Extension

    Binks Type EN 45° Angled Spray Extension
    Binks 45° Angled Spray Type "EN" spray gun extension.
    • Used to extend the reach with spray pattern in a 45 degree angle.
    • Uses any of the 60 series air and fluid nozzles.
    • Adjustment knob for fan control.
    • Fits through a 2-1/2" clearance hole.
    • Extension head is a fixed 45° angle spray-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type ENX 45° Angled Spray Extension

    Binks Type ENX 45° Angled Spray Extension
    Binks 45° Angled Spray Type "ENX" spray gun extension.
    • Used to extend the reach with spray pattern in a 45 degree angle.
    • Uses smaller J series air and fluid nozzles.
    • Fits through a 1-3/4" clearance hole.
    • Extension head is a fixed 45° angle spray-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type ERX 45° Angled Spray Extension

    Binks Type ERX 45° Angled Spray Extension
    Binks 45° Reversed Angled Spray Type "ERX" spray gun extension.
    • Used to extend the reach with spray pattern in a 45 degree reversed angle.
    • Uses smaller J series air and fluid nozzles.
    • Fits through a 1-3/4" clearance hole.
    • Extension head is a fixed 45° reversed angle spray-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type EB 90° Angled Spray Extension

    Binks Type EB 90° Angled Spray Extension
    Binks 90° Angled Spray Type "EB" spray gun extension.
    • Used to extend the reach with spray pattern in a 90 degree angle.
    • Uses any of the 60 series air and fluid nozzles.
    • Adjustment knob for fan control.
    • Fits through a 3" clearance hole.
    • Extension head is a fixed 90° angle spray-does not swivel
    • Long needle shuts material off at the tip.
  • Binks Type EBX 90° Angled Spray Extension

    Binks Type EBX 90° Angled Spray Extension
    Binks 90° Angled Spray Type "EBX" spray gun extension.
    • Used to extend the reach with spray pattern in a 90 degree angle.
    • Uses smaller J series air and fluid nozzles.
    • Fits through a 1-7/8" clearance hole.
    • Extension head is a fixed 90° angle spray-does not swivel
    • Long needle shuts material off at the tip.